ROSA3D-PLA Rainbow Silk Ocean 1,75mm 0,8kg

PLA Rainbow Silk Ocean filament by Rosa3D allows you to prepare 3D prints with unique, fiery colors. Each spool contains multi-colored line in fiery shades: deep red, luminous orange, yellow and golden tones. What's more, thanks to the use of a unique PLA-based material blend, PLA Rainbow Silk Ocean filament has a glossy finish. One spool weighing 800g net contains 4 full cycles of color transitions. There is one color cycle in 200g of filament. Depending on the selected printing parameters (print size and fill density), you can include as many colors as you want in your model.

PLA Rainbow Silk Ocean does not require printing in a closed chamber, however, we recommend a higher extrusion temperature than in the case of PLA Starter. This filament is characterized by low shrinkage and is devoid of a specific smell. PLA Rainbow Silk Ocean prints are characterized by excellent interlayer adhesion and very good detail reproduction. ATTENTION! The frequency and sequence of color transitions is fixed for a given production series. Thus, a single spool can start at any point in the process, e.g. one spool can start with red and another with orange. Differences in shades are allowed.

• extrusion temperature: 195-225°C
• table temperature: 40-60°C
• airflow: 20-100%
• printing speed: 60-80 mm/s
• The filament can be printed on non-heated tables. In case of problems with adhesion, we recommend the use of an adhesive agent.

• Diameter: 1.75mm
• Weight: 800 g (vacuum packed with desiccant)
• Spool weight: 245 g
• Color cycle transition: every 200g

• Density: 1.25g/cm3
• Smell: odorless
• The pigments used are not approved for contact with food