Qidi Tech X-Max 3 Printer

Qidi Tech X-Max 3 Printer

New all-metal frame
Ultra-stable, reinforced with metal crossbars at the bottom, resistant to deformation.

High-strength steel linear axis with high hardness
Improved surface straightness and 60% less error deviation.
Very durable and does not require frequent maintenance.
It usually lasts a lifetime without having to be replaced.

CoreXY structure
Reduces movement inertia and improves movement speed.
TMC2209 silent drive, less noise.

New cooling system
Reduces the risk of clogging and ensures smooth extrusion.
Gear ratio 9.5:1
More stable, stronger, faster extrusion.

Two sets of printheads
Copper alloy nozzle for better thermal conductivity, smooth printing and more durability.
Hardened steel nozzle for abrasive printing and long-term use.
Both sets have a maximum print temperature of 350℃.

Temperature controlled chamber and a dryer
Independent heating device
Maximum temperature 65℃
High efficiency printing PET-CF, PAHT-CF etc.
Chamber fan with active carbon air filter.

No layer separation
The higher the temperature in the heated chamber, the greater the range of materials that can be printed. The heated chamber ensures uniform part building without generating internal stresses.

Specyfications: 

Build Volume (W×D×H): 325*325*315mm
Dimensions (W×D×H): 553*553*601mm
Net weight (kg): 30.2
Printing Speed: ≤600mm/s
Extruder Flow: 35mm³/s @PLA Matte(Model:150*150mm single wall; Material: PLA Rapido Matte;Temperature: 240℃
Extruder Temp: ≤350°C
Hotend (Included): Copper alloy nozzle hotend
For Common materials,Hardened steel nozzle hotend For Abrasive materials
Auxiliary Part Cooling Fan: ✔
Chamber Temperature Control: 65°C Independent Chamber Heating
Chamber Circulation Fan With Activated carbon air filter:✔
Screen: 5.0 inch 800*480 touch screen
Seal print: Dryer Box + Desiccant
Connection Options: 150M 2.4G Wi-Fi USB Flash Drive/Ethernet Cable
Rated Power 900W
Recommended Filament: PAHT-CF,PET-CF,PA12-CF
Compatible filament: PLA, ABS, ASA, PETG, TPU, PC, UltraPA, Nylon, etc.
Structure: CoreXY
Z Axis: Double Z axis
X axis: High-grade hardness steel linear hollow optical axis
Firmware: Klipper
Printing Acceleration: 20000mm/s²
Printing Accuracy: ±0.1 mm
Filament diameter: 1.75mm
Bed Leveling: Automatic Leveling
Extruder transmission ratio :  9.5:1
Hot end: Ceramic Heating Core
Extruder: High-flow Direct Drive Extruder
Nozzle diameter: 0.4mm (0.2,0.6,0.8mm Optional)
Hot bed temperature: ≤120℃
Printing Plate: Double-Sided Flexible Magnetic HF Plate
Filament Detection: Yes
Resonance Compensation：Yes
Pressure Advance：Yes
Voltage: 100-240VAC, 50/60Hz
Main Processor: Cortex-A53,64-bit Processor 1.5Ghz,8G-EMMC,1G DDR3
Slicer: QIDI Print and other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.
Operating System: Windows, MacOS, Linux Assembled and First Print within 10 minutes