Flashforge Adventurer 3 3D Printer

Flashforge Adventurer 3 3D Printer

The Adventurer 3 features an innovative solution for removing the model after printing. By gently pressing a button at a designated point on the table, the print surface can be slid out and safely removed. This allows even large models to be removed without the use of additional tools that can easily damage the adherent surface.

Amaximum print tableoperating temperature of as much as 100°C, which allows the Adventurer 3 to be used to create models in ABS material. The largest print size for this printer is 150 x 150 x 150 mm.

The printer has an enclosure of closed type. However, the transparent side walls allow the user to observe the process of printing the model. Thanks to the LED light mounted inside, the process of applying subsequent layers of filament is even more visible. Lighting can be switched off or on again from the printer's touch menu. The printer also has an internal camera, which allows you to remotely control the printout.

• Supply voltage: 110 V to 240 V (AC - mains)
  
• Total power: 150 W
  
• Display: 2.8 inch touchscreen
  
• Printing speed: 10 to 100 mm/s
  
• Printing accuracy: ± 0.2 mm
  
• Print thickness: 0.1 mm to 0.4 mm
  
• Nozzle diameter: 0.4 mm
  
• Supported Filament: PLA, ABS
  
• Filament diameter: 1.75 mm
  
• Operation mode:   Online, Ethernet or from a flash drive
  
• Output file format: GX/G
  
• Software: FlashPrint
  
• Print size: 150 x 150 x 150 mm
  
• Nozzle temperature: 240°C max.
  
• Work table temperature: 100°C
  
• Printer dimensions: 340 x 388 x 405 mm
  
• Weight: 9 kg
• Warranty: 12 months