- Out-of-Stock
Menu
-
MenuBack
-
3D PRINTING
-
-
-
-
Filaments
-
-
-
Resins for printers
-
Printer accessories
-
-
-
3D SCANNERS
-
-
Accessories for scanners
-
-
-
-
Brands
-
-
-
DENTAL
-
-
OUTLET
%
-
-
Linear technique
-
-
-
-
-
-
-
Hydraulics and pneumatics
-
-
-
LASERS
-
- SALE
- 3D SERVICE
- CONTACT
- Certyfikat ISO
ROSA3D-PET-G CarbonLook 1,75mm 1kg
zł123.00 brutto
100.00 tax excl.
14 dni na zwrot
Odstapienie od umowy w terminie do 14 dni bez podawania powodu
Szybka wysyłka
Przedmioty dostępne na magazynie wysyłamy w dni robocze w przeciągu 24 godzin
PET-G (polyethylene terephthalate with an admixture of glycol) is a material that is easy to 3D print, with high transparency and a neutral smell. Application: Prototyping, large-format prints, covers/housings.
PET-G CarbonLook by ROSA3D was designed for prints where the visual effect of the object is more important than its industrial use. A small addition of carbon fibers used in the PET-G Standard material makes it possible to obtain a print with a satin surface and almost invisible layers, with only a small stiffening the material. An additional advantage is the possibility of obtaining a slight transparency of the material in prints with very thin walls.
Printing with PET-G CarbonLook is characterized by a low level of stringing and excellent adhesion between layers. Obtaining fascinating effects is as easy as in the case of PET-G Standard filament. The material does not shrink, does not require a closed chamber. Due to the low content of carbon fibers in the material, the abrasion of the filament is lower than in the case of PETG+CF material, which translates into less wear of the printing nozzle.
Recommended printing parameters
- extrusion temperature 220-260°C
- table temperature: 60-80°C
- airflow: 0-30% (depending on model geometry)
- printing speed: 60-80 mm/s
PRODUCT PARAMETERS PET-G CarbonLook
- Diameter: 1.75mm
- Net weight: 1000g
- Spool weight: 200g
PHYSICAL PARAMETERS PET-G CarbonLook
- Density: 1.29g/cm3
- Smell: odorless
- Heat distortion temperature: 78°C (ISO 306)
ROSA3D-3078
Specific References
- EAN13
- 5907753132055
New
PET-G (polyethylene terephthalate with an admixture of glycol) is a material that is easy to 3D print, with high transparency and a neutral smell. Application: Prototyping, large-format prints, covers/housings.