Spectrum PET CF15 1,75mm 0,75kg black Filament

Spectrum PET CF15 1,75mm 0,75kg black Filament

Spectrum PET CF15 is a material based on black polyethylene terephthalate, dyed in the mass. It is the easiest carbon filled material on the market designed for 3D printing. The filament has no retraction problems and there is no need to use a heating chamber during printing. A characteristic feature of the filament is the excellent surface finish straight from the printer, thus reducing the need for post-processing.

Spectrum PET CF15 is compatible with support materials such as HIPS-X. The filament allows you to print very strong and rigid elements. It is characterized by low influence of moisture and temperature on dimensions. The produced models can be subjected to additional heat treatment to improve their mechanical properties.

Very attractive from a technical point of view, the properties of the Spectrum PET CF15 filament can be achieved if the basic rules for storing this type of material are observed (in a dry and dark place with a humidity below 15%). In order to obtain the best parameters of the printed object, it is recommended to dry the material before starting work.

Due to the high content of carbon fiber, it is recommended to use nozzles with a diameter larger than the standard 0.4mm. In addition, the presence of carbon fiber can cause abrasion of brass nozzles, therefore, for long-term use of Spectrum PET CF15, it is recommended to use stainless steel nozzles.

General information
Black colour
Color Spectrum: Carbon
Filament diameter: 1.75mm
Dimensional tolerance: ±0.03mm
"Verify your spool" option - preview of the diameter along the entire length of the spool: YES
Density: 1.40 g/cm³
Net Weight: 750g
Gross Weight: 1150g

Recommended printing parameters
Printing temperature: 245-270°C
Heated screed: required
Table temperature: 50-70°C
Print speed: 30-80mm/sec
Heated working chamber: not required

General information
Black colour
Color Spectrum: Carbon
Filament diameter: 1.75mm
Dimensional tolerance: ±0.03mm
"Verify your spool" option - preview of the diameter along the entire length of the spool: YES
Density: 1.40 g/cm³
Net Weight: 750g
Gross Weight: 1150g

Recommended printing parameters
Printing temperature: 245-270°C
Heated screed: required
Table temperature: 50-70°C
Print speed: 30-80mm/sec
Heated working chamber: not required