ROSA3D-PET-G CarbonLook 1,75mm 0,5kg

PET-G CarbonLook by ROSA3D was designed for prints where the visual effect of the object is more important than its industrial use. A small addition of carbon fibers used in the PET-G Standard material makes it possible to obtain a print with a satin surface and almost invisible layers, with only a small stiffening the material. An additional advantage is the possibility of obtaining a slight transparency of the material in prints with very thin walls.

Printing with PET-G CarbonLook is characterized by a low level of stringing and excellent adhesion between layers. Obtaining fascinating effects is as easy as in the case of PET-G Standard filament. The material does not shrink, does not require a closed chamber. Due to the low content of carbon fibers in the material, the abrasion of the filament is lower than in the case of PETG+CF material, which translates into less wear of the printing nozzle.

• extrusion temperature 220-260°C
• table temperature: 60-80°C
• airflow: 0-30% (depending on model geometry)
• printing speed: 60-80 mm/s

• Diameter: 1.75mm
• Net weight: 500g

• Density: 1.29g/cm3
• Smell: odorless
• Heat distortion temperature: 78°C (ISO 306)