ROSA3D-ASA 1,75mm White 0,7kg

ROSA3D-ASA 1,75mm White 0,7kg

ASA filament (acrylonitrile-styrene-acrylic) by ROSA3D is a UV resistant, moisture resistant and heat resistant polymer. ASA’s UV resistance makes it an ideal material for outdoor applications, that are going to be exposed intensively to the sun and various weather conditions.

ASA is suitable when you need an efficient material, which is going to cause less printing problems than ABS. The filament has lower shrinkage level, and the produced odor is much less perceptible. The softening point for ASA printouts is higher compared to PLA and PETG, there are no signs of deformation up to temperatures close to 94 ° C. The exceptional mechanical and thermal properties of ASA as well as excellent resistance to UV radiation make it an perfect material and an ABS alternative for use in the automotive and marine industries and for outdoor applications such as mirror housings, covers, radiator covers and sensor housings.

TECHNICAL PARAMETERS
Diameter    1.75 mm
Diameter tolerance    +/- 0.05 mm
Oval tolerance    +/- 0.02 mm
Net weight    700g; 900 g; (vacuum packed with a moisture absorber)
Print temperature    230-260 °C
Bed temperature    70-110 °C

PHYSICAL PARAMETERS
Density    1,07 g/cm3
Odor    Almost odorless
Tensile elongation    35 %
Tensile strength (to break)    40 MPa
Tensile modulus    1750 MPa
Notched Izod impact strength    45 kg*cm/cm
Vicat softening point    94 °C