Devil Design glue (adhesive coating for 3d printing) 110ml

Devil Design glue (adhesive coating for 3d printing)

The adhesive glue for 3D printers can be applied to any build surface: glass, aluminum, or adhesive mats. It creates a unique layer between the build platform and the first print layer, ensuring perfect adhesion of the printed object. Without an adhesive coating, the printer may start extruding filament in unintended places, leading to the well-known "spaghetti effect" familiar to 3D printing enthusiasts. When the machine is in operation and the bed is heated, the glue holds the print securely in place, preventing warping. However, once the print is complete and the bed cools down, the part is automatically "released," allowing for easier removal. This adhesive is essential for large prints made from high-shrinkage materials like ABS, Nylon, PC, PA, and many others.

The glue has a vanilla scent and easily washes off surfaces with warm water. Unlike hair spray-based aerosols, this product is in liquid form, which allows for precise application without sticking to other parts of the printer.

How to use the adhesive for 3D printing:

• Shake for a few seconds.
• Ensure that you apply the product on a non-heated build platform.
• Wait about 2-3 minutes for the glue to fully dry.
• Wait for the build platform to reach the appropriate temperature.
• Start printing and maintain the bed temperature to prevent detachment issues.
• After the print is done, wait for the temperature to drop to at least 50°C.
• The print is ready to be removed.

Physical properties of the product:

• Package dimensions: 36x36x167mm
• State: liquid
• Consistency: sticky
• Scent: vanilla
• Water washable: yes
• Color: colorless
• Capacity: 110ml
• Application: glass/aluminum

Suggested operating temperatures:

Material/ Bed temp:
ABS 90-100°C
ASA 90-100°C
HIPS 90-100°C
PLA 50-60°C
PET-G 70-80°C
TPU 20-80°C