Phrozen Functional Resin – TR250LV High Temp Resin 1kg

Phrozen Functional Resin – TR250LV High Temp Resin 1kg

Weight: 1KG per bottle / 5kg per bottle

XY Resolution: 0.047 mm

Layer Height / Parameter: 15 sec @ 50 um, Delay 1

Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.

Compatible Printer: Phrozen 3D Printer Series

Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application

Key Performance:

Viscosity: 230 cps

Proportion: 1.1

Tg: 100 °C

Elongation: 20 %

Break value: 25 MPa

Surface hardness: Shore 79 D

I-Zod Impact: 6.31 KJ/m2

Hazard Identification

Signal word Warning.
Hazard Statement Causes eye irritation, May cause allergic skin reaction.
Hazard substance: Ethoxylated Bisphenol-A Diacrylate Hazard statement: H315 Causes skin irritation H317 May cause an allergic skin reaction
Precautionary Statement Store in well-ventilated place. Keep away from ignition sources No smoking. Do not wear contact lenses. Chemical safety goggles are recommended. Avoid eyes and skin contact. Wear suitable protective equipment. Call a doctor or physician if you feel unwell.