Phrozen TR300 Ultra-High Temp 3D Printing Resin Gray

Phrozen TR300 Ultra-High Temp 3D Printing Resin Gray

TR300 Ultra-High Temp 3D Printing Resin - Perfect for Creating 3D Printed Parts for Engineering

Phrozen TR300 3D Printing Resin comes with extremely high thermal resistance, high mechanical strength, and with a certain toughness, making it ideal for high-temperature applications such as industrial mock-ups, and creating 3D printed jewelry.

Weight: 1kg per bottle
Density: 1.17 g/cm3
Viscosity: 160 cP
Surface Hardness: 80 Shore D
Tensile Stress at Break: 32 MPa
Elongation at Break: 2 %
Tensile Modulus: 1857 MPa
Notched Izod Impact: 8.00 J/m
Tg: 220 °C
HTD at 0.45 MPa: 190 °C

Precautions:

•     Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
•     After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
•     Keep resin away from kids and away from direct sunlight exposure.
•     Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
•     DO NOT dump resin. Please cure it and treat it as general plastic garbage.

Hazards Identification

Signal word Warning.
Hazard Statement Causes eye irritation, May cause allergic skin reaction.
Precautionary Statement Store in well-ventilated place. Keep away from ignition sources No smoking. Do not wear contact lenses. Chemical safety goggles are recommended. Avoid eyes and skin contact. Wear suitable protective equipment. Call a doctor or physician if you feel unwell.